_____________________________________________________________________________ * | * FILE gem_settings.nml (last update: Jan.23,2007- v3.2.2)VL | *_____________________________________________________________________________| *_____________________________________________________________________________ * | * PTOPO namelist | *_____________________________________________________________________________| * | | | * NAME | DESCRIPTION |DEFVAL| *--------------------|-------------------------------------------------|------| * Ptopo_npex | Number of PE's used along X axis | 1 | * Ptopo_npey | Number of PE's used along Y axis | 1 | * Ptopo_nblocx | Number of blocks for output along X | npex | * Ptopo_nblocy | Number of blocks for output along Y | npey | *----------------------------------------------------------------------------- *_____________________________________________________________________________ * | * GRILLE namelist | *_____________________________________________________________________________| * | | | * NAME | DESCRIPTION |DEFVAL| *--------------------|-------------------------------------------------|----- | * Grd_typ_S | Computational grid type: first letter is G or L | "GU" | * | for Global or Lam, second letter is U or V | | * | for Uniform or Variable mesh | | * Grd_roule | .TRUE. for rotated coordinate system |false | * Grd_ni | number of points in x | 0 | * Grd_nj | number of points in y | 0 | * Grd_xlon1 | geographic longitude of the center of the | 0.0 | * | computational domain when roule= .true. | | * Grd_xlat1 | geographic latitude of the center of the | 0.0 | * | computational domain when roule= .true. | | * Grd_xlon2 | geographic longitude of a point on the equator | 0.0 | * | of the computational domain when roule= .true. | | * Grd_xlat2 | geographic latitude of a point on the equator of| 0.0 | * | the computational domain when roule= .true. | | * Grd_gauss_L | .TRUE. to set for a Gaussian grid |false | *--------------------|-------------------------------------------------| | * The following 2 parameters apply only for uniform portion | | * of GV grids and for LU grids | | * Grd_dx | mesh length (resolution) in x-direction(degrees)| 0. | * Grd_dy | mesh length (resolution) in y-direction(degrees)| 0. | * | | | *--------------------|-------------------------------------------------| | * The following 4 parameters apply only for GV grids | | * Grd_nila | number of points in x of the uniform or higher | 0 | * | resolution domain | | * Grd_njla | number of points in y of the uniform or higher | 0 | * | resolution domain | | * Grd_dxmax | maximum grid point spacing along x (degrees) | 360. | * Grd_dymax | maximum grid point spacing along y (degrees) | 180. | * | | | *--------------------|-------------------------------------------------| | The following 4 parameters apply only for LAM grids | | * Grd_iref | I reference point (within Grd_ni) | 1 | * Grd_jref | J reference point (within Grd_nj) | 1 | * Grd_latr | latitude on rotated grid of reference point | 0. | * | (Grd_iref,Grd_jref)| | * Grd_lonr | longitude on rotated grid of reference point | 0. | * | (Grd_iref,Grd_jref)| | * | ie: reference point on centre of grid 401x301 | | * Grd_iref=201,Grd_jref=151,Grd_latr=0.,Grd_lonr=180. | | * | ie: reference point on centre of grid 400x300 | | * | where Grd_dx =.14,Grd_dy = .44, | | * | Grd_iref=201, Grd_jref=151, | | * | Grd_lonr=180.07, Grd_latr=0.22, | | *----------------------------------------------------------------------------- *_____________________________________________________________________________ * | * GEMENT namelist | *_____________________________________________________________________________| * | | | * NAME | DESCRIPTION |DEFVAL| *--------------------|-------------------------------------------------|------| * Out1_etik_s | label for the standard RPN files. |"JEM" | * Topo_filmx_L | .true. -filtering 2 delta X topography |true | * | .false. -no filters to topography | | * Topo_init_L | .false. ==> NULL(NO) topography |true | * Topo_dgfmx_L | .true. -apply digital filter to topography |false | * Topo_dgfms_L | .true. - consider map scale in digital filtering|true | * | .false.- ignore map scale in digital filtering | | * Anal_perturb | True to bit flip (bmf_perturb) on analyse data |false | * e_schm_stlag | .true. cubic lagrange interpolation for U,V |true | * | interpolation coefficients | | * | .false. not available, error will occur | | * e_schm_adcub | .true. cubic interpolation from phi to UV grid |true | * | .false. linear interpolation | | * E_geol_glanl_L | true -> Analysed Ice is used. |true | * | false-> Climat Ice is used. | | * E_geol_glreg_L | true -> Analysed Ice field will be used |false | * | within a lat-lon box defined by | | * | E_geol_gln, E_geol_gls, E_geol_gle, E_geol_glw | | * | Climatological Ice field will be | | * | use outside the box. | | * | false-> Analysed Ice field will be used | | * | over the entire domain. | | * E_geol_hsanl_L | true -> Analysed HS is used. |true | * | false-> Climat HS is used. | | * E_geol_hscon_L | true-> HS field is mask independant |false | * | false-> HS field is mask dependant | | * E_geol_hsreg_L | same as E_geol_glreg but for HS instead of GL |true | * E_geol_gls | Latitude delimiting the southern extent of | 30. | * | the Ice field lat-lon box (see E_geol_glreg_L) | | * E_geol_gln | Latitude delimiting the northern extent of | 80. | * | the Ice field lat-lon box (see E_geol_glreg_L) | | * E_geol_gle | Longitude delimiting the eastern extent of | 320. | * | the Ice field lat-lon box (see E_geol_glreg_L) | | * E_geol_glw | Longitude delimiting the western extent of | 220. | * | the Ice field lat-lon box (see E_geol_glreg_L) | | * E_geol_hss | Latitude delimiting the southern extent of | 30. | * | the Ice field lat-lon box (see E_geol_hsreg_L) | | * E_geol_hsn | Latitude delimiting the northern extent of | 80. | * | the Ice field lat-lon box (see E_geol_hsreg_L) | | * E_geol_hse | Longitude delimiting the eastern extent of | 320. | * | the Ice field lat-lon box (see E_geol_hsreg_L) | | * E_geol_hsw | Longitude delimiting the western extent of | 220. | * | the Ice field lat-lon box (see E_geol_hsreg_L) | | * E_geol_hsea | threshold height above which any sea water grid|3000 | * | point will be transformed into a land point | | * E_geol_poin | maximum grid points distance when looking | 3 | * | for neighbours values. | | * E_geol_modex_L | .true. - to search the analysis only |false | * E_geol_z0cst | > 0 means this value is used as the Z0 constant| -1. | * P_pbl_schsl_s | SCHMSOL: land surface processes |FCREST| * P_pbl_snoalb_L | SNOALB_ANL: true to use "snoalen" (I6) |true | * | false to use "snoagen"(XA) | | * P_pbl_schurb_S | SCHMURB : urban surface processes | NIL | * E_tr3d_list_S | list of tracers to be read from analyse | | * E_trvs_list_S | list of sliced tracers read from analyse | | * E_schm_offline_L | .true. for GEM offline mode (MEC) |false | * Offline_ip1a | ip1 value for piloting fields used in Offline | 0 | * Offline_int_accu_S | Type of interpolation used for accumulators |LINEAR| * Pil_runstrt_S | Starting date for LAM run (yyyymmdd.hhmmss) | ' ' | * Pil_nesdt | Number of seconds between 2 consecutive | 0 | * | boundary condition(BC) time frames | | * Pil_datacvrg | Data coverage period of pilot files in seconds.| 0 | * | The entry program will generate/process | | * | Pil_datacvrg/Pil_nesdt BC time frames | | * Pil_ctebcs_L | .true. for fixed boundary conditions in LAM |false | * Hblen_momentx | Number of points to horizontally blend btwn | 10 | * | nesting and computed values for momentum fields| | * Hblen_tx | Number of points to horizontally blend btwn | 10 | * | nesting and computed values for temperat fields| | * Hblen_massx | Number of points to horizontally blend btwn | 10 | * | nesting and computed values for mass fields| | * Hblen_trx | Number of points to horizontally blend btwn | 10 | * | nesting and computed values for tracer fields| | * Hblen_wfct_S | weight function used to blend (COS2,CONST) | COS2 | *----------------------------------------------------------------------------- *_____________________________________________________________________________ * | * GEM_CFGS namelist | *_____________________________________________________________________________| * | | | * NAME | DESCRIPTION |DEFVAL| *--------------------|-------------------------------------------------|------| * Step_total | Total number of timesteps for model run | 1 | * Step_rsti | Number of timesteps to save a restart file | 9999 | * Step_bkup | Number of timesteps to save a restart file for | 9999 | * | backup if "restart" is not true. | | * Step_gstat | Number of timesteps for a global stat (glbstat)| 9999 | * Step_cleanup | Number of timesteps to activate Xfer.sh | 0 | * | 0: Xfer is active only after clone | | * hyb | array of model levels in HYBRID |-1.0 | * Grd_rcoef | Controls the continuous transition from sigma | 1.6 | * | to pressure surfaces range: 1. <= rcoef <= 2. | | * | rcoef=1.0 means NO transition | | * Pres_ptop | top required for non-rigid model top |-1.0 | * Pres_vtap_L | TRUE to calc GZ from Temp based on VTAP |false | * Level_ip12000_L | TRUE to use fst2000 IP1 encoding |false | * Mem_mx3db | Factor to multiply space needed to allocate | 50 | * | central memory for VMM Manager | | * Mem_phyncore_L | .True. for physics to be in memory in core |false | * | .False. for physics to be written in WA files | | * G_halox | number of points for the halo on X | 4 | * G_haloy | number of points for the halo on Y | 4 | * Init_balgm_L | true -> initialization is performed |false | * Init_dfwin_L | true -> windowing is applied |true | * Init_dfnp | number of points for digital filter | 5 | * | (equals the number of timesteps +1) | | * Init_dfpl_8 | period limit of digital filter (secs.) |21600.| * Init_dftr_L | true -> passive tracers digitally filtered |false | * | false-> passive tracers set to result obtained | | * | at mid-period during initialization | | * | period (no filtering) | | * Offc_a0_8 | off-centering parameter for the current timestep| 1.0 | * Offc_a1_8 | off-centering parameter for the current timestep|-1.0 | * Offc_b0_8 | off-centering parameter for the current timestep| 0.6 | * Offc_b1_8 | off-centering parameter for the current timestep| 0.4 | * Schm_hydro_L | true -> hydrostatic run |false | * | false-> non-hydrostatic run | | * Schm_nonhy_8 | 0 to 1: from hydrostatic to non-hydrostatic |1.0 | * Schm_moist_L | true -> model has moisture |true | * Schm_chems_L | true -> CHEMISTRY package is used in model run |true | * Schm_phyms_L | true -> PHYSICS package is used in model run |true | * Schm_itcn | number of iterations for Crank-Nicholson | 2 | * Schm_modcn | frequency of Crank-Nicholson procedure | 1 | * Schm_xwvt3 | type of extrapolation for wind calculation | 0 | * | at time t-dt/2 (th): | | * | =0 => two time levels (t1, t2) | | * | =1 => two time levels (t1, t2) for u,v | | * | three time levels for vertical wind | | * | =2 => three time levels (t1, t2, t3) | | * Schm_wload_L | Apply water loading in the calculations |false | * Schm_itnlh | number of iterations to solve non-linear | 2 | * | Helmholtz problem | | * Schm_itraj | number of iterations to compute trjectories | 2 | * Schm_alpco_8 | Relaxation parameter for Coriolis inversion | 1.0 | * Schm_hdlast_L | .true. => physics before horizontal diffusion |false | * Schm_adcub_L | .true. => cubic interpolation |true | * | .false.=> linear interpolation | | * Schm_psadj_L | true -> ps adjust is activated (at every time |false | * | step, the integral of ps over the domain| | * | is restored to the value of the previous| | * | time step; afterward, q and s are re- | | * | computed;this can be done in | | * | hydrostatic mode only)| | * Schm_difqp_L | .false.=> no diffusion on q' |true | * | .true. => indirect diffusion on q' & direct | | * | diffusion on (dp/dpi-1) & (1+d)q' | | * Schm_maxcfl_lam | Control for size of advection halo in LAM | 2 | * Schm_pcsty_L | compute physics tend. for tpt1,tplt1,tdt1,psdt1 |true | * Schm_pheat_L | compute physics tendencies for fit1 and fipt1 |true | * Schm_sfix_L | .true. to copy l_nk-1 values to l_nk in TT,.... |sylvie| * Adw_nkbz_L | .true. => not-a-knot bc for z-spline |true | * | .false.=> natural bc for z-spline | | * Adw_exdg_L | .true. => to print points of upstream positions |false | * | outside of advection source grid | | * | .false.=> to not print | | * Adw_ckbd_L | .true. => to check if upstream points from north|false | * | and south PE's are inside adv. grid | | * | .true. => to not call the adw_ckbd subroutine | | * Adw_halox | halo for advection grid on X for global run | 3 | * Adw_haloy | halo for advection grid on Y for global run | 2 | * Adw_trunc_traj_L | .true. to truncate trajectories for LAM |false | * Adw_mono_L | .true. for monotonic advection on tracers |true | * Adw_lag3d_L | .true. for cubic Lagrange in 3D advection(faster|false | * Adw_nosetint_L | .true. to bypass adw_setint for TRILIN (intern) |false | * Glb_pil_n | number of points to use for north pilot region | | * Glb_pil_s | number of points to use for south pilot region | | * Glb_pil_e | number of points to use for east pilot region | | * Glb_pil_w | number of points to use for west pilot region | | * Cstv_dt_8 | timestep used by the model | 900. | * Cstv_uvdf_8 | horizontal diffusion coeff. for horiz. winds |20000.| * Cstv_phidf_8 | horizontal diffusion coeff. for phi, T, etc. |20000.| * Cori_cornl_L | .true. => to use Coriolis (3) formulation |true | * | .false.=> to use Coriolis (2) formulation | | * Cstv_pitop_8 | basic state pressure at the top |-1.0 | * Cstv_pisrf_8 | basic state pressure at the surface |1000.0| * Cstv_tstr_8 | t* (basic state temperature) | 200.0| *--------------------|-------------------------------------------------|------| * Horizontal diffusion if activated, will be applied to the following | | * variables : * Winds, Temperature, Pressure, Total Divergence, GZ...| | *--------------------|-------------------------------------------------|------| * Hzd_type_S | "HO" High Order horizontal diffusion | "HO" | * | "FACT" for factorized horizontal diffusion | | * | "NIL" for no horizontal diffusion | | * Hzd_pwr | Hor. diffusion order when using HO del-n | 6 | * | available: 2, 4, 6, 8 | | * Hzd_lnr | 2 delta-x removal ratio when using HO | 0.2 | * Hzd_difva_L | Logical control for latitudinal modulation of |false | * | the horizontal diffusion coefficient | | * Hzd_uvwdt_L | Logical control to limit application of hor. | true | * | diffusion on momentum variables only | | * Hzd_t1_0_L | true if winds T1 filt. in WDPERS (mode NL) | | * Hzd_t1_1_L | true if winds T1 filt. in WDPERS (mode AD) | | * Hzd_t0_0_L | true if winds T0 filt. in WNDTH (mode NL) | | * Hzd_t0_1_L | true if winds T0 filt. in WNDTH (mode AD) | | * Hzd_1d_L | true if 1D diff. (otherw. 2D) for filtering | | * Hzd_hdif0_0_L | true if hdif0 authorized (mode NL) | | * Hzd_hdif0_1_L | true if hdif0 authorized (mode AD) | | * Hzd_hzdmain_0_L | true if hzd_main authorized (mode NL) | | * Hzd_hzdmain_1_L | true if hzd_main authorized (mode AD) | | * Eigv_parity_L | .true. to apply the parallel direct solution |false | * | of high-order diffusion equation with mxma8 | | * | using reflexion symmetry of C-grid(global) | | *--------------------|-------------------------------------------------|------| * Vertical sponge if activated, will be applied to the following variables : | * Winds, Temperature, Pressure, Total Divergence, GZ... | | *--------------------|-------------------------------------------------|------| * Vspng_nk | # of levels from the top of the model (thickness| | * | of the vertical sponge layer) | 0 | * Vspng_mf | (non-LAM) the multiplicative factor(s) of the | -1 | * | the the factorized del-2 horizontal diffusion | | * Vspng_njpole | (non-LAM) Number of points along j on which to | 3 | * | apply modulation to 0. of the diff. coefficient | | * Vspng_nutop | (LAM only) the diffusion coefficient for the | -1 | * | 9 point explicit horizontal filter (0.0 to 2.0)| | * | Note: the higher the value, the smoother | | * Vspng_uvwdt_L | .true. Logical control to force vertical sponge | true | * | to be applied ONLY on momentum and temperature | | * | for Vspng_nk levels and only the very top level | | * | for the other variables | | * | .false. To apply vertical sponge on all | | * | variables for Vspng_nk levels | | * Vspng_rwnd_L | Logical control to diffuse real wind instead of |false | * | wind images within the vertical sponge scheme | | *--------------------|-------------------------------------------------|------| * Horizontal sponge if activated, will be applied to the following | | * variables : * Winds, Temperature, Pressure, Total Divergence, GZ...| | * It is not available for LAM | | *--------------------|-------------------------------------------------|------| * Hspng_nj | Number of rows from numerical poles on which | 0 | * | to apply an increasing FACT horizontal diffusion| | * Hspng_mf | Multiplicative factor(s) of horizontal | 800 | * | diffusion coefficient | | * Hspng_uvwdt_L | Logical control to limit application of |true | * | horizontal sponge on momentum variables only | | * Hspng_rwnd_L | Logical control to diffuse real wind instead of |false | * | wind images within the horizontal sponge scheme | | * Xst_statij | stations chosen in gridpoints i,j for time-serie|-9999.| * Xst_statll | stations chosen in lat,lon for time-series |-9999.| * Lctl_debug_L | .true. to print more information to std output |false | * Lctl_r8stat_L | .true. to print glbstats with double precistion |false | * Lctl_reset | timestep to start the actual integration |-1 | * | This allows a "warmup" integration period | | * Out3_etik_S | 'etiket' used in output fields. Default is taken| ' ' | * | from the entry run in gemntr run Out1_etik_S | | * Out3_flipit_L | .true. to flip output from ni*nj*nk to ni*nk*nj |false | * Out3_debug_L | .true. to have verbose during output calls |false | * Out3_ip3 | default value for IP3 is 0 | 0 | * | -1 for IP3 to contain step number, >0,given IP3 | | * Out3_nbitg | Packing factor used for all variables except for| 16 | * | those defined in Out_xnbits_s | | * Out3_unit_S | 'H' or '' for output in hours, 'P' for in steps,| '' | * | 'S'(seconds),'M'(minutes),'D'(days) | | * Out3_ndigits | minimum of digits used to represent output units| 3 | * Out3_closestep | period (in timesteps) to accumulate records in | -1 | * | one output file. -1 to have one timestep/file | -1 | * Out3_linbot | number of layers close to the bottom of the | 0 | * | model within which a linear interpolation of GZ | | * Out3_zund | list of levels for underground extrapolation | 0 | * | and VT is done even if flcubic is .true. | | * Out3_cliph_L | .true. to clip humidity variables on output |false | * Out3_vt2gz_L | .true. to compute hydrostatic GZ from P0 and VT |false | * The following are 7 switches used in the context of vertical | | * interpolation toward pressure levels: | | * Out3_cubzt_L | .true. for cubic interpolation for GZ,VT and HU |true | * Out3_cubuv_L | .true. for cubic interpolation for UU,VV and UV |true | * Out3_cubds_L | .true. for cubic interpolation for DS |true | * Out3_cubqs_L | .true. for cubic interpolation for QS and Q3 |true | * Out3_cubdd_L | .true. for cubic interpolation for DD |true | * Out3_cubqq_L | .true. for cubic interpolation for QQ and QR |true | * Out3_cubww_L | .true. for cubic interpolation for WW |true | * Vtopo_start | Timestep to start topography which varies in time -1 | * Vtopo_ndt | Number of timesteps for topography to evolve | 0 | * Vrtd_L | apply background vert. diffusion on U,V | | * Vrtd_theta_L | if .T. and Vrtd_L=.T., also diffuse theta | | * Vrtd_coef | vertical diffusion coefficient | | * Zblen_L | .true. to apply vertical sponge to momentum, and| true | * | divergence field | | * Zblen_spngthick | thickness (in meters) of vertical sponge | | * Zblen_spngtt_L | if .T. and Zblen_L=.T., apply sponge also to | false| * | temperature field | | *----------------------------------------------------------------------------- *_____________________________________________________________________________ * | * Var4d namelist | *_____________________________________________________________________________| * | | | * NAME | DESCRIPTION |DEFVAL| *--------------------|-------------------------------------------------|------| * V4dg_conf | Configuration of the job | 0 | * | 0 : Standard GEM job | | * | 100-199 : 4D-Var job with GEM | | * | 400-499 : Test of the adjoint model | | * | 500-599 : Test of the tangent linear model | | * | 500 : Ratio TLM test as in Thepaut and | | * | Courtier(1991) | | * | 510 : Run NLM, NLM perturbed and TLM | | * V4dg_stepob | Observations available at each stepob Step_total| * V4dg_inv | Time 0 NOT in cost J if set to 1 | 1 | * V4dg_incore_L | .true. if WA files are replaced by incore arrays|true | * V4dg_4dvar_L | .true. 4D-Var with JO in GEM and JB in 3D-Var |false | * V4dg_sensib_L | .true. for Sensitivity analysis |false | * V4dg_twin_L | .true. for Twin experiment |false | * V4dg_sgvc_L | .true. for evaluation of singular vectors |false | * V4dj_mask_L | .true. to read mask in observation file |false | * V4dm_itmax | Maximum number of iterations | 2 | * V4dm_simax | Maximum number of simulations | 2 | * V4dg_identity_L | .true. to set integration as identity |false | * V4dg_pruv_L | .true. to do proviles on U-V grids for winds |true | * V4dg_chum_S | humidity variable ('HU' or 'LQ') |'LQ' | * V4dzge_degree | degree of interpolation for gem to gauss grid | 1 | * V4dzga_degree | degree of interpolation for gauss to gem grid | 1 | * V4dz_degree | degree of interpolation for profiles | 1 | * V4dg_anincr_L | .true. if TLM test with analysis increments |false | * V4dr_redotr_L | if we redo the TRAJ calculations | | * V4dg_sgvc_dt0 | time btwn analysis and targeting time(in hours) | 0 | *----------------------------------------------------------------------------- *_____________________________________________________________________________ * | * Physics namelist (p_nml.cdk) | *_____________________________________________________________________________| * | | | * NAME | DESCRIPTION |DEFVAL| *--------------------|-------------------------------------------------|------| * P_pset_second_L | .TRUE. implies that a second call to the |false | * | physics package will be done | | *--------------------|-------------------------------------------------| | * The following parameters are ignored when P_pset_second_L is .FALSE. | | * ************* but they MUST be otherwise specified *****************| | * otherwise, only the first physics will be called | | * P_pset_xofset | number of columns from the edges of the grid | 0 | * | where only the second physics set is requested. | | * | This is applied both on the left and right sides| | * | when P_pset_xofsetr is undefined | | * P_pset_xofsetr | columns for the right side of the grid where | -1 | * | only the second physics is requested. Defaults | | * | to P_pset_xofset | | * P_pset_yofset | number of rows from the edges of the grid where | 0 | * | only the second physics set is requested. Again,| | * | this is appled both on the bottom and top sides | | * | when P_pset_yofsett is undefined | | * P_pset_yofsett | # of columns for the top side of the grid where | -1 | * | only the second physics is requested. Defaults | | * | to P_pset_yofset | | * P_pset_xblnd | number of columns where both physics are | 1 | * | requested + 1 (this is the blending region) | | * P_pset_yblnd | number of rows where both physics are requested | 1 | * | + 1 (this is the blending region) | | *--------------------|-------------------------------------------------| | * P_rad_schm_s | RADIA: radiation scheme |oldrad| * P_rad_knt | KNTRAD:number of timesteps between full | 3 | * | radiation calculation. (2hrs + 1 timestep| | * P_rad_fomic_L | FOMIC: Fomichev radiation code |false | * P_rad_ftp_s | RADFILES:'STD'-RPN standard or 'UNF'-unformatted|'STD' | * P_rad_nivl | RADNIVL: list of levels on which radiation (IR | 0 | * | and visible) calculations are performed| | * P_rad_qco2 | QCO2: CO2 concentration in PPMV | 360. | * P_rad_filter_L | RADFLTR: .true. for vertical smoothing on | true | * | radiative fluxes | | * | .false. for no vertical smoothing | | * P_rad_tsflxir_L | TS_IRFLX: to use TT(12000) instead of skin Temp |false | * | in downward IR flux calculation | | *--------------------|-------------------------------------------------| | * P_clim_clima_L | CLIMAT: .true. for climate mode |false | * P_clim_ininc_L | .true. to define physics surface forcing increm |false | * P_str_strato_L | STRATOS: .true for stratos consideration |false | *--------------------|-------------------------------------------------| | * P_pbl_advectke_L | .TRUE. implies that a second call to the |false | * | physics package will be done | | * P_pbl_drag_L | DRAG: surface friction (simplified Physics) |false | * P_pbl_ocean_L | CHAUF:surface heat flux from oceans(simp.Physics|false | * P_pbl_impflx_L | .true. ==> implicit surface fluxes |false | * | .false. ==> explicit surface fluxes (default) | | * P_pbl_evap_L | EVAP: surface evaporation |false | * P_pbl_dbgvv_L | DBGMEM: debug physics memory |false | * P_pbl_truew_L | true: the physic interface will receive geograph|false | * | -ical wind components (meridionnal and | | * | zonal components) from the model. The | | * | returned tendencies will be rotated back | | * | into the model's frame of reference. | | * P_pbl_snwmlt_L | SNOWMELT: snow melting |false | * P_pbl_stomat_L | STOMATE: stomatal resistance |false | * P_pbl_typsol_L | TYPSOL: soil surface parameters |false | * P_pbl_cortm_L | CORTM: TM corrected for difference between |true | * | original and filtered topography | | * P_pbl_corts_L | CORTS: TS and TP corrected for difference |false | * | between original and filtered topography | | * P_pbl_drylp_L | DRYLAPS: .true., uses dry adiabat |true | * | .false., uses Schuman-Newell lapse rate | | * P_pbl_monta_L | MONTAGN: .true., run with mountains |true | * | .false. mountains set to zero | | * P_pbl_iceme_L | ICEMELT: sea ice melting |false | * P_pbl_agreg_L | AGREGAT: switch to control aggregation of |false | * | properties | | * P_pbl_bndlr_s | FLUVERT: boundary layer processes |'NIL' | * P_pbl_nslof | NSLOFLUX: number of timesteps for which surface | 0 | * | fluxes "FC" and "FV" are gradually set from 0 | | * | to their full value in a "slow start fashion" | | * | at the beginning of a time integration | | * P_pbl_albkg_L |.true. :To use background albedo (no snow) |false | * |.false.:To compute albedo considering snow, ice, | | * | and vegetation | | *--------------------|-------------------------------------------------| | * The following 6 variables are thermal parameters for the ground | | * P_pbl_cst | heat capacity of soil |2.3E+6| * P_pbl_csn | heat capacity of snow |1.0E+6| * P_pbl_csg | heat capacity of ice |2.0E+6| * P_pbl_kst | heat diffusivity of soil |0.5E-6| * P_pbl_ksn | heat diffusivity of snow |0.6E-6| * P_pbl_ksg | heat diffusivity of ice |1.1E-6| *--------------------|-------------------------------------------------| | * The following variables are to help compute latitudinal modulation of| | * vertical diffusion coefficient on momentum by fitting a cubic btwn | | * values P_pbl_valml_8 and P_pbl_valeq_8 at latitudes P_pbl_mllat_8 | | * and P_pbl_eqlat_8 | | * P_pbl_valml_8 | background value of multiplication factor of | 1.0 | * | P_pbl_spng out of equator | | * P_pbl_mllat_8 | latitude at which the multiplication factor | 30.0 | * | becomes P_pbl_valml_8 out of equator | | * P_pbl_valeq_8 | equatorial value of multiplication factor of | 1.0 | * | P_pbl_spng | | * P_pbl_eqlat_8 | equatorial latitude at which the multiplication | 5.0 | * | factor becomes P_pbl_valeq_8 | | *--------------------|-------------------------------------------------| | * P_pbl_spng | EPONGE:coefficients that multiply KM to simulate| 0.0 | * | sponge layer near the top of the model | | * P_pbl_mix_s | BLAC62 :mixing length calculated using Blackadar|BLAC62| * | BOUJO: mixing length calculated using Bougeault| | * P_pbl_dumpbus | timestep frequency at which to print | 0 | * P_pbl_as | AS: parameter for stability function | 12.0 | * P_pbl_beta | BETA: parameter for stability function | 1.0 | * P_pbl_z0tlat | latitude (2 elements, in degrees) used to | 0.0 | * | specify Z0T over water | | * | If |lat| <= Z0TLAT(1) constant Z0T | | * | If |lat| >= Z0TLAT(2) Charnock's relation | | * | in between, linear interpolation is used | | * P_pbl_zua | height of wind input for surface flux calculat | -1 | * P_pbl_zta | height of temp and humidity input for SFX calc | -1 | * P_pbl_tdiaglim_L | to limit on decrease of tdiag |false | * P_pbl_limsnodp_L | to limit snow depth to 10cm on seaice and glacie|false | * P_cond_satu_L | SATUCO: .true. water/ice phase for saturation |false | * | .false. water phase only for saturation | | * P_cond_ilwc_L | INILWC: to initialize water content and cloud |false | * | fraction at time 0 for Sundqvist schemes| | * P_cond_filtend | number of passes into 2 delta x filter | -1 | *--------------------|-------------------------------------------------| | * The following variables defines the central window and the blending| | * region where different condensation schemes will be used | | * P_cond_xofset | for FCPKUO option only |Grd_ | * | number of columns from the edges of the grid | left| * | where only KUOSYM is requested (left, right) | | * P_cond_xblnd | for FCPKUO option only | 1 | * | number of columns where both schemes are | | * | requested (blending region) | | * P_cond_dzsedi | Minimal thickness of the sedimentation layer | -1. | * | (if -1., thickness will be taken from physics | | * P_cond_yofset | for FCPKUO option only |Grd_ | * | number of rows from the edges of the grid where | belo| * | only KUOSYM is requested (bottom,top) | | * P_cond_yblnd | for FCPKUO option only | 1 | * | number of rows where both schemes are requested | | * | (blending region) | | *--------------------|-------------------------------------------------| | * P_cond_conv_s | CONVEC: convection scheme name |'NIL' | * P_cond_stcon_s | STCOND: condensation scheme name |'NIL' | * P_cond_shlct_s | SHLCVT: shallow convection name ' ',' ' | * | P_cond_shlct_s(1):GELEYN,CONRES,SHALOW,SHALODQC | | * | P_cond_shlct_s(2):KTRSNT,NIL | | * P_cond_hc | 0.0 -> 1.0; threshold relative humidity for | 0.0 | * | onset of moist convective adjustment| | * P_cond_hf | 0.0 -> 1.0; threshold relative humidity for | 0.0 | * | upward moisture flux during | | * | convective adjustment| | * P_cond_hm | 0.0 -> 1.0; an input in the calculation of the | 0.0 | * | saturation relative humidity for the| | * | first iteration | | * P_cond_filco | filtering coefficients | 0.0 | * P_cond_kkl | KKL:edimentation threshold for mixphase | 0.1 | * P_cond_pcptype_s | PCPTYPE: | 'NIL'| * | 'BOURGE':use Bourgouin algorithm (bourge1) to | | * | determine types of precipitation. Cannot use with | * | 'mixed phase' and 'Kong-Yau' condensation schemes | * | 'NIL': no call to bourge1 | | * P_cond_kfcmom_L | .true. for transfer of momentum | TRUE | * P_cond_kfctrig4 | 4 values to control trigger parameter of | | * | Kain-Fritsch convection scheme (WKLCL): 0,0,.05,.05| * | Trigger parameter will increase from | | * | P_cond_kfctrig4(3)| .05 | * | to P_cond_kfctrig4(4)| .05 | * | between timestep P_cond_kfctrig4(1)| 0 | * | to timestep P_cond_kfctrig4(2)| 0 | * P_cond_kfcrad | initial convective updraft radius in KFC scheme | 1500.| * P_cond_kfcdepth | minimum depth of convective updraft in KFC schem| 4000.| * P_cond_kfcdlev | initial level of forced detrainment in KFC schem| 0.5 | * P_cond_kfcdet | total forced detrainment in KFC scheme | 0.0 | * P_cond_kfctimec | convective time scale in Kain-Fritsch | 3600.| * P_cond_kfctimea | convective time adjustment in Kain-Fritsch schem| 3600.| * P_cond_kfcpcp_s | 'ORI': orig. scheme to not retain precip in KFCP|'ORI' | * | 'CONSPCPN': conservation of precip. in KFCP | | * P_cond_kfctriga | nominal resolution for which KFCTRIG4 is set | -1.0 | * | this is inactive if value <= 0 | | * P_cond_kticefrac_L | .true. to use ice fraction calculation | true | * P_gwd_s | GWDRAG: gravity wave drag formulation | GWD86| * P_serg_srsus_L | .true. for time-series requested |false | * P_serg_srsrf_s | list of surface variables for time-series output| ' ' | * P_serg_srprf_s | list of profile variables for time-series output| ' ' | * P_serg_srwri | number of timesteps between time-series writeout| 1 | * P_serg_serstp | times series package stops at this timestep | 99999| * P_out_moyhr | time length (hours) for special time average | 0 | * | physics variables | | * P_zong_znli | zonal diagnostic interval in timesteps | 0 | * P_zong_znmod | extraction mode: | 1 | * | 1 => save variables | | * | 2 => save the square of the variables | | * | 3 => save both | | * P_zong_znoff_L | .true. to suspend the zonal diagnostics |false | * P_zong_znsus_L | .true. for zonal diagnostics requested |false | * P_zong_znsrf_s | list of surface variables for zonal diagnostics | ' ' | * P_zong_znprf_s | list of profile variables for zonal diagnostics | ' ' | * P_zong_nbin | number of geographical latitude bands | G_nj | *----------------------------------------------------------------------------- *_____________________________________________________________________________ * | * Physics2 namelist (p_nml2.cdk) is a duplicate set of all variables | * starting with P_pbl_ - > P_pbl2_ and P_cond_ -> P_cond2_ to control | * the parameterization of the variable region in the regional climate mode| * Refer to the definitions and default values above | *_____________________________________________________________________________| *_____________________________________________________________________________ * | * SIMPLIFIED_PHYSICS namelist | *_____________________________________________________________________________| * | | | * NAME | DESCRIPTION |DEFVAL| *--------------------|-------------------------------------------------|------| * P4d_kdphys | Kind of physics (full=0) (simplified=1) | 0 | *--------------------|-------------------------------------------------|------| * P4d_pbl | Option number of planetary boundary layer | 0 | * | 0 = no parameterization | | * | 1 = linear diffusion coefficients | | * | 2 = linear diffusion coefficients | | * | (coefficients from the nonlinear | | * | low-resolution run) | | *--------------------|-------------------------------------------------|------| * P4d_lsc | Option number of moist processes | 0 | * | option LS CONDENSATION MOIST CONVECTION | | * | 0 false false | | * | 100 true false | | * | 200 false true | | * | 300 true true | | *--------------------|-------------------------------------------------|------| * P4d_sgo | LIN_SGO: sub-grid scale orography schemes avail | 0 | * | in V4d adjoint and tangent linear model| | * | The option indicates the settings of | | * | the parameters. | | * |-------------------------------------------------| | * | option GWD BLOCKING AA1 AA2 APPLYTEND | | * | 0 No parameterization | | * | 100 true true 1 1 false | | * | 110 true true 0 1 false | | * | 120 true true 1 0 false | | * | 130 true true 0 0 false | | * | 101 true true 1 1 true | | * | 111 true true 0 1 true | | * | 121 true true 1 0 true | | * | 131 true true 0 0 true | | * | 210 false true 0 1 false | | * | 220 false true 1 0 false | | * | 230 false true 0 0 false | | * | 201 false true 1 1 true | | * | 211 false true 0 1 true | | * | 221 false true 1 0 true | | * | 231 false true 0 0 true | | * | 300 true false 0 0 false | | * | 301 true false 0 0 true | | * where: | * GWD : true to compute gravity-wave drag tendency | * BLOCKING : true to compute orographic-blocking tendency | * APPLYTEND : true to apply total tendency to winds inside this LIN_SGO scheme| * AA1 : '1' for the directional factor in blocking term to be linearized| * AA2 : '1' for the vertical factor in blocking term to be linearized| *_____________________________________________________________________________ *_____________________________________________________________________________ * | * Theo_cfgs namelist | *_____________________________________________________________________________| * | | | * NAME | DESCRIPTION |DEFVAL| *--------------------|-------------------------------------------------|------| * Theo_case_s | name of theoretical case |'xxx' | * | ie: 'BUBBLE',''BUBBLE_G','2_BUBBLES' | | * Theo_nivdist_S | type of distribution on vertical levels |'UNI' | * Out1_etik_s | See description in above namelists |'THEOC| * Pil_runstrt_S | See description in above namelists | | *----------------------------------------------------------------------------- *_____________________________________________________________________________ * | * Bubble_cfgs namelist | *_____________________________________________________________________________| * | | | * NAME | DESCRIPTION |DEFVAL| *--------------------|-------------------------------------------------|------| * BB_dpth | temperature perturbation of bubble | case | * BB_radius | Radius of the bubble in degrees of longitude | d | * | (.0001 deg ~ 10m) | e | * BB_xcntr | fraction of the domain in x of the centre of the| p | * | bubble (0.5 ->middle of domain) | e | * BB_zcntr | value of pressure in hPa of the centre of the | n | * | (1000hPa = 0m, 900hPa = 100m) | d | * BB_xcntr2 | if Theocase=2_BUBBLES: as for BB_xcntr, but for | a | * | second bubble | n | * BB_zcntr2 | if Theocase=2_BUBBLES: as for BB_ycntr, but for | t | * | second bubble | | * BB_isoth | potential temperature of isentropic basic state |303.16| * G_nk | Number of vertical levels to be created | | * (There are other variables but pre-defined in the namelists above) | * See the comdeck "theonml.cdk" for the keys active in this scheme | *----------------------------------------------------------------------------- *_____________________________________________________________________________ * | * Mtn_cfgs namelist | *_____________________________________________________________________________| * | | | * NAME | DESCRIPTION |DEFVAL| *--------------------|-------------------------------------------------|------| * mtn_tzero | temperature perturbation of bubble | | * mtn_hwx | wavelength of large-scale component of mountain | | * mtn_hwx1 | wavelength of small-scale component of mountain | | * mtn_hght | mountain height | | * mtn_nstar | Brunt-Vaisala frequency | | * mtn_tzero | isothermal reference state | | * mtn_flo | upstream velocity in x direction | | * (There are other variables but pre-defined in the namelists above) | * See the comdeck "theonml.cdk" for the keys active in this scheme | * Default values depend on the theoretical case chosen | *-----------------------------------------------------------------------------